EPSON FX-2190II-N DOT MATRIX PRINTER

Home/Dot Matrix Printer, Technology/EPSON FX-2190II-N DOT MATRIX PRINTER

EPSON FX-2190II-N DOT MATRIX PRINTER

Note: Prices are VAT inclusive and subject to change without prior notice.

SKU: 11058 Categories: ,

Description

Printing Technology:


Control Panel:6 switches and 10 LEDsPrint Direction:Bi-direction with logic seekingPrinting Method:Impact dot matrixNumber of Pins in Head:9 pinsControl Code:ESC/P2, IBM PPDS

Reliability:


Print head life:400 million strokes / wireMean Print Volume Between Failure (MVBF):52 million lines (except print head)Mean Time Between Failure (MTBF):25,000 Power On Hours (POH) (25% Duty)

Print Characteristics:


Bitmap Fonts:Epson Draft: 10, 12, 15 cpiScalable Fonts:Epson Roman / Epson Sans SerifBarcode:EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET

Paper Media:


Cut Sheet (Single Sheet):Entry: Front
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.065 – 0.14 mm | (0.0025 – 0.0055”)
Entry: Rear
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.065 – 0.14 mm | (0.0025 – 0.0055”)Cut Sheet (Multi-part Sheet):Entry: Front
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.12 – 0.46 mm | (0.0047 – 0.018”)
Entry: Rear
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.12 – 0.46 mm | (0.0047 – 0.018”)Continuous Paper (Single Sheet / Multi-part):Copies:
Original + 4 copies
Entry: Front / Rear / Bottom
Length: 101.6 – 558.8 mm | (4.0 – 22.0”)
Width: 101.6 – 406.4 mm | (4.0 – 16.0”)
Thickness: 0.065 – 0.46 mm | (0.0025 – 0.018”)Envelope (No.6):Entry: Rear
Length: 92 mm | (3.6”)
Width: 165 mm | (6.5”)
Thickness: 0.16 – 0.52 mm | (0.0063 – 0.0205”)Envelope (No.10):Entry: Rear
Length: 105 mm | (4.1”)
Width: 241 mm | (9.5”)
Thickness: 0.16 – 0.52 mm | (0.0063 – 0.0205”)Label (Base Sheet):Entry: Buttom
Length: 101.6 – 558.8 mm | (4.0 – 22.0”)
Width: 101.6 – 406.4 mm | (4.0 – 16.0”)
Thickness: 0.16 – 0.19 mm | (0.0063 – 0.0075”)Card:Entry: Front / Rear
Length: 100 – 148 mm | (3.9 – 5.8”)
Width: 100 – 148 mm | (3.9 – 5.8”)
Thickness: 0.22 mm | (0.0087”)Roll Paper:Entry: Rear
Diameter: 127mm | (5”)
Width: 216 mm | (8.5”)
Thickness: 0.07 – 0.09 mm | (0.0028 – 0.035”)Line Spacing:4.23mm (1/6”) or programmable in increments of 0.059mm (1/432”)

General:


Operating Systems:Printer Driver: Microsoft Windows XP / Vista / 7 / 8 / 10

Utility
Epson Status Monitor 3: Microsoft Windows XP / Vista / 7 / 8 / 10
Epson Setting Utility: Microsoft Windows XP / Vista / 7 / 8 / 10

Electrical Specifications:


Rated Voltage:AC 220 – 240 VRated Frequency:50 Hz – 60 HzOperating:54WSleep:0.8WPower Off:0.1W in power off mode

Consumables:


Ribbon Cartridge Black:Standard: Fabric Ribbon Cartridge (Black)
Ribbon Life: Approx. 12 million Characters*1

Environmental Conditions (Operating):


Temperature:5 – 35 °C*2Humidty:10 – 80% RH*2

Acoustic Noise:


Acoustic Noise:55 dB

Input Data Buffer:


Input Data Buffer:128KB

Interface:


Interface:USB 2.0, Bi-directional parallel (IEEE-1284 nibble mode supported) Serial, 100base-Tx wired LAN

Go to Top